1～9 item / All 9 items
Distribute the grease and oil pumped from pumps evenly in proportion to the number of outlets!
Features 〇 Distributes equal amounts accurately for each unit. 〇 Dispenses 0.25 cm³ per unit at a time. 〇 Operating pressure is within 0.7 MPa. 〇 Can be used with a manifold attachment to double the dispensing amount. 〇 The YU type has a safety valve (the YD type does not).
![Counter-equipped dual line distribution valve [KS-C･KW-C series]](https://image.mono.ipros.com/public/product/image/ecb/2000437069/IPROS97586104596432802489.png?w=280&h=280)
Early detection and repair of abnormal areas is possible! With the counter attached to the distribution valve, you can check the operating status of the distribution valve even when the grease pump is stopped.
The "KS-C・KW-C Series" is a distribution valve for dual lines with a counter. It notifies you of the lubrication status through counting, making inspection work easy. With a mechanical structure, it boasts excellent durability and can be installed in any orientation. 【Features】 ■ Alerts you to blockages in the piping ■ No risk due to mechanical mechanism ■ Can identify areas of poor lubrication due to counting anomalies ■ Space-saving type that does not require much installation space ■ Utility model registered ■ Design registered *For more details, please refer to the PDF materials or feel free to contact us.
![Single Line Distribution Valve [KU Series]](https://image.mono.ipros.com/public/product/image/1c4/2000508269/IPROS93251358903432370359.jpeg?w=280&h=280)
By combining with the manual grease pump KSP-105, centralized lubrication can be achieved at a low cost. The number of discharge outlets can also be freely adjusted using dedicated auxiliary brackets.
【Features】 ● Made of aluminum die-cast, it is lightweight. ● Maximum operating pressure is 14.7 MPa. ● Comes with a pointer for easy oil level checking. ● Available in four outlet configurations: 4, 6, 8, and 12 outlets. It can also accommodate odd numbers of outlets when using dedicated auxiliary fittings.
Robust and excellent durability! The high-pressure specifications enhance the reliability of refueling, allowing for a wider range of refueling options.
We would like to introduce the distribution valves "DV/DW/GW/LV" that we handle. The "DV type" is used in dual-line systems and accurately supplies lubricant to each lubrication point based on the pressure of the lubricant being alternately pumped from the supply main. The operation of the distribution valve can be confirmed by an indicator. In addition, we offer the "DW type," which makes it easy to change to an odd number of outlets; the "GW type," which allows for easy increase or decrease of lubrication points; and the "LV-100 type," which enables centralized management of lubrication points. 【DV Type Features】 - Accurate lubrication - Robust and excellent durability - Maximum operating pressure of 21 MPa - Ability to adjust the lubrication amount and check operation for each outlet *For more details, please refer to the PDF materials or feel free to contact us.
Various spool sizes corresponding to the required amount for the refueling location are available! Distribution valve with a forward operation method.
We would like to introduce the distribution valves handled by Daikin Lubrication Equipment. There are seven types of distribution valve models: "MJN, M, MX, MJNO, MO, MXMO, MG," which consist of a supply body, an end body, an intermediate body (minimum 3, maximum 8), and gaskets. We offer various spool sizes that correspond to the required amount of lubrication (grease, oil) at the lubrication points, allowing for precise lubrication. 【Features】 ■ Progressive operation method ■ Only one pipe is needed ■ Installation of alarm indicators is possible ■ Built-in operating components make it robust and resistant to water and dust *For more details, please refer to the PDF materials or feel free to contact us.
The number of channels and motion detection features are extensive! With a wide variety, it is easy to create diverse system plans.
The "LV" is a distribution valve for Rubies (single line). The connection method of the distribution valve includes the I-stage distribution valve method for a small number of oil supply points (up to 120) and the II-stage distribution valve method for a large number of oil supply points or when the supply points are dispersed. "Rubies" is a "single pipe progressive action" lubrication system composed of one pump, a distribution valve, and a branched single piping. Additionally, by installing a detection switch, blockages and damages in the main pipe (branch pipe) can be detected electrically. 【Features】 ■ The operation status can be visually confirmed with the operation indicator attached to the distribution valve. ■ Confirmation of the oil supply cycle is also possible. ■ Lightweight and compact due to its miniaturized design, making installation and handling easy. ■ Models with outlet numbers ranging from 2 to 12 are available in the lineup. *For more details, please refer to the PDF document or feel free to contact us.
![Dual Line Distribution Valve [KS/KW Series]](https://image.mono.ipros.com/public/product/image/d2b/2000508047/IPROS36986476204841459309.png?w=280&h=280)
It is a pressure guarantee type distribution valve for dual lines, available in single discharge and double discharge options. It is robustly constructed, allowing for safe use.
【Features】 ● Parallel installation type that draws in two pipes. ● Distributes lubricant sent from the pump in a fixed quantity to each bearing. ● Flow rate can be adjusted for each outlet within a certain range using adjustment screws. ● Easily expandable or reducible according to the increase or decrease of lubrication points. ■ KS Type (Single Discharge Type) Discharges grease from one location on both sides of the main piston. ■ KW Type (Double Discharge Type) Discharges grease from separate outlets on both sides of the main piston. Please use in combination with a dual-line lubrication pump. Limit switches for confirming the operation of the distribution valve, counters, and dustproof distribution valve covers are also available.
Achieving high pressure and large discharge volume! Introduction of electric grease pumps and distribution valves compatible with 40MPa.
We would like to introduce the electric grease pump and distribution valve that we handle. The "UE" is a pump used in dual-line systems. With high pressure and large discharge volume, it supports downsizing of piping and extensive lubrication, contributing to cost reduction of lubrication systems. The piping connection and refill port are compatible with G-thread connections and can handle up to 40MPa. Additionally, the "DX" is a distribution valve that supports ultra-high pressure of 40MPa and allows switching between single and double discharge. It is possible to independently change the discharge mode to single or double for all elements. 【UE Features】 ■ Achieves high pressure and large discharge volume ■ Unique pump structure ■ Capable of high-pressure piping connections *For more details, please refer to the PDF materials or feel free to contact us.
Proposing 'oil-air lubrication'! It makes processing easier as grease and lubricating oil do not mix with the cooling water.
We would like to introduce the oil-air distribution valve 'MIX' handled by Daikin Lubrication Equipment. In steel mills, various methods such as grease lubrication, oil lubrication, forced lubrication, and micro-mist systems have been put into practical use as centralized lubrication systems. Efforts to minimize the environmental impact have become necessary, and among these, "oil-air lubrication," which allows a small amount of lubricant to be supplied directly to the bearings, is being adopted. Our company is pleased to propose the new "oil-air lubrication." 【Features of Oil-Air Lubrication】 ■ The lubricant supplied to the bearings is minimal. ■ The bearing area is constantly sealed with air, preventing foreign substances and cooling water from entering the bearings. ■ The discharged oil is collected in an oil receiver, maintaining a clean environment within the factory without contamination. ■ Since grease and lubricating oil do not mix with cooling water, processing becomes easier. *For more details, please refer to the PDF document or feel free to contact us.
